ZBT-RP2803 Product Specification

ZBT-RP2803 Product Specification

Table Of Contents

1 Overview

1.1 Brief Overview

1.2 Reference Standards

2 Product Images

3 Main Product Features

4 Hardware Functions

4.1 Hardware Interface Introduction

4.2 Indicator Light Function Introduction

4.3 Hardware Platform Introduction

5 WIFI Wireless Parameter Introduction

5.1 WIFI 2.4G

6 Power Supply And Power Consumption Description

7 Structural Parameters And Accessories Introduction

8 Product Working Environment Requirements

9 Software Configuration Information

 

1 Overview

1.1 Brief Overview

    This document describes the electrical characteristics, radio frequency performance, size and application environment of ZBT-RP2803. With the introduction of this documentation, end users or developers can quickly understand the hardware functions of ZBT-RP2803.

     ZBT-RP2803 is a 300M wireless repeater product that creates a link between two AP devices through the wireless interface, and then shares the Internet network through wireless WiFi 4 and 100Mbps wired LAN, which can expand wireless coverage or enhance signal quality. .

 

1.2 Reference Standards

Relevant Standards And Specifications:

IEEE802.11n/g/b/

IEEE802.3/802.3u

 

2 Product Images

 

3 Main product features

Adopt MT7628KN solution, MIPS24KEc architecture CPU, main frequency up to 580MHZ

2.4G WIFI rate up to 300Mbps

Chip built-in 8MB DDR1 and 8MB Nor Flash

1LAN full 100M adaptive network port, supports automatic flip (Auto MDI/MDIX)

External high-gain omnidirectional antenna, wireless signal 360 degrees without dead spots

 

 

 

4 Hardware functions

4.1 Hardware Interface Introduction

Network Port	LAN port 1, 100Mbps supports automatic flip (Auto MDI/MDIX) Compliant with IEEE 802.3/802.3u
Power Port	Built-in 220V AC power strip
Button	Reset button 1 piece
Antenna	2 omnidirectional 3dbi 2.4G antennas

 

4.2 Indicator Light Function Introduction

Power LED	Green: Always on when power is on, not on when power supply is abnormal.
LAN LED	Green: lights up when plugging in the network cable, data transmission flashes
WIFI LED	Green: WiFi starts normally and lights up, data transmission flashes
LINK LED	Green: Relay connection lights up normally, data transmission flashes

 

4.3 Hardware Platform Introduction

CPU	MT7628KN MIPS24KEc architecture CPU, with a main frequency of up to 580MHZ
2.4G WIFI chip	MT7628KN integrates 2.4G WIFI function IEEE 802.11n/g/b, maximum rate 300Mbps
RAM	DDR1 8MB (MT7628KN chip integration)
Flash Memory	Nor Flash 8MB

 

5 WIFI wireless parameter introduction

5.1 WIFI 2.4G

Compatible with IEEE 802.11 b/g/n, supports IEEE 802.11 d/h/k; supports 20MHz, 40MHz, uses 2T2R MIMO antenna technology, and the maximum connection rate is up to 300Mbps. The following is a description of the industrial frequency, receiving sensitivity, and transmit power of 2.4G WIFI.

	Explanation	Maximum Value	Rated Value	Minimum Value	Unit
Operating Frequency		2484		2412	MHz
Receiving Sensitivity	11 Mbps CCK	-86	-87.5	-89	dBm
	54 Mbps OFDM	-72	-74	-76	dBm
	BW=20MHz MCS 7	-70	-72	-74	dBm
	BW=40MHz MCS 7	-68	-70	-71	dBm
Transmit Power	11 Mbps CCK	19	18	17	dBm
	54 Mbps OFDM	17	16	15	dBm
	BW=20MHz MCS 7	17	16	15	dBm
	BW=40MHz MCS 7	16	15	14	dBm

 

6 Power Supply And Power Consumption Description

	Test Conditions	Minimum Value	Rated Value	Maximum Value	Unit
Operating Voltage	T A = 25°C		220V		V
Absolute Operating Voltage	T A = 25°C	TBD		TBD	V

7 tructural Parameters And Accessories Introduction

Weight（KG）	TBD
Housing Size	L*W*H=87.9*58.4*29.8MM(national standard)
Color	Black

 

8 Product Working Environment Requirements

Operating Temperature	-5℃ to 45℃
Storage Temperature	-40℃-to70℃
Operating Humidity	10% to 90%RH  non-condensing
Storage Humidity	5% to 90%RH  non-condensing

 

9 Software Configuration Information

Default IP	192.168.188.1
Username/Password	root/admin
2.4G SSID	Repeater-XXXXXX (X is the last 6 digits of the MAC address), no password by default

 

 

The above is the general default configuration information of the product. The WIFI SSID may be different when using our ecos firmware, but the default IP, WEB login name and password of this product remain unchanged. Please refer to the product description for other detailed software functions.